Smart locks
House lockouts
Re-keying
Deadbolt upgrades
Schlage
Kwikset
Car keys & fobsNon-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Get your free estimateSchlage Locksmith in Venice, CA | Tumbler Lock & Key
We service, rekey, and install Schlage locks throughout Venice, including 90291 and 90294, and also offer Schlage repair in Santa Monica. What makes our Schlage work here different is simple: we know how salt air eats cylinders, how walk-street access changes a job, and which older Schlage deadbolts are worth rebuilding versus replacing. We’re an independent Schlage service provider, not manufacturer-affiliated, and we answer the phone at (877) 265-3856.
Noel Cardenas has spent the better part of three decades working locks, and he still approaches every Schlage deadbolt the way his old instructor put it: understand the lock better than the person who bought it. That means we don’t upsell replacements when a rekey or rebuild will do. Call us at (877) 265-3856 for a straight answer.
Why Venice Residents Choose Us for Schlage Service
We work on Schlage hardware every week. Rekeying aging single-cylinder deadbolts on 1920s bungalows, retrofitting B60 and BE-series deadbolts into doors that were never built for them, programming Encode and Sense smart locks on short-term rentals. That’s the daily grind at Schlage sales & service, and it’s why we know the line’s quirks from the inside rather than from a manufacturer script.
Our brand fluency runs from Kwikset to Medeco, but Schlage is the one we see most often on Venice doors. It’s the default deadbolt on rental courts, the lock getting swapped onto remodeled walk-street bungalows, and the smart lock Airbnb hosts install the week before their first guest checks in. We keep OEM Schlage cylinders, tailpieces, and strike plates stocked for fast turnaround across our Venice service area. We are not authorized, sponsored, or endorsed by Schlage. We’re an independent shop that knows the hardware because we handle it daily.
Styles & brands we work with
Common Schlage Locksmith Problems We Solve in Venice
- Stiff, gritty, or seized exterior deadbolts. Salt air and marine humidity from the Pacific pit Schlage cylinders and strike plates faster than inland locks. Keys get stiff first, then stop turning entirely. We strip, clean, re-lube, and re-pin where the cylinder still holds, and tell you straight when it’s pitted beyond saving.
- Worn tailpieces and internal springs on older single-cylinder deadbolts. On Schlage deadbolts installed decades ago in Venice courts and bungalows, the tailpiece wears down and the thumbturn spins without throwing the bolt. It looks like a broken lock but it’s usually a $20 part and a 20-minute fix.
- BE365 and Encode keypad failures on turnover day. A short-term rental in Venice can’t wait a week for a smart lock repair. Battery sag and firmware hiccups leave renters locked out right when a host is doing a 4 PM turnover. We re-pair, re-program, and replace worn keypads under pressure.
- Misaligned strikes on old mortise and rim-lock doors. Retrofitting a modern Schlage deadbolt onto a 1910s stucco bungalow door often means the new bolt binds against the frame. Sagging hinges shift everything. We realign strikes, shim hinges, and make the lock throw clean without chewing up the cylinder.
- Lost keys on a walk-street or canal-front property. When a tenant loses a key on a pedestrian-only walk street, rekeying is the cost-smart reset. We re-pin the lock to a new key so the lost key becomes irrelevant, no full hardware replacement needed.
Schlage Service in Venice: What Local Conditions Mean for Your Equipment
On Venice’s pedestrian-only walk streets and the canal-front paths, we can’t pull the truck to the door. A Schlage rekey or smart-lock install there means hauling the pin kit, plug followers, spare cylinders, and a fresh deadbolt down narrow pedestrian pathways, sometimes for several blocks. That changes how we scope and price the visit compared with a standard driveway call. It also means we plan the job before we arrive, so we’re not walking back to the truck for a part we should have packed.
The housing stock itself shapes Schlage work here too. The 1910s and 1920s stucco bungalows and the postwar Venice court clusters mostly came with mortise-style or rim locks. Modern Schlage deadbolts get retrofitted onto them, and the retrofits fail differently than factory installs do. Doors sag, strikes shift, and the new bolt binds. Add the salt air that pits exterior cylinders and you get a repair pattern that’s unique to Venice: a lock that isn’t broken, but is fighting its door and its environment at the same time.
Schlage Models & Products We Service in Venice
We service the full residential Schlage line you’ll find on Venice doors. B60 and B62 single-cylinder deadbolts are the workhorses on rental courts and bungalows. BE365 and BE499 keypad deadbolts show up constantly on short-term rentals. Encode and Sense smart locks go on canal-front and walk-street remodels. And F-series knobs and levers get paired with older mortise and rim locks where original hardware can’t be economically replaced.
On parts, we use genuine Schlage OEM cylinders, tailpieces, and strike plates wherever they’re still available. For discontinued older hardware where OEM parts are gone, we reach for quality aftermarket equivalents and tell you which is which. On salt-corroded exterior locks we rebuild and re-lube before recommending replacement. But a pitted, worn-out cylinder on a 30-year-old deadbolt is usually an honest replace, not a repeat repair call waiting to happen.
Schlage Service Pricing in Venice
Schlage service in Venice runs on a few variables: the lock’s age and condition, whether it’s a straightforward rekey or a smart-lock install, and whether we’re working at a standard driveway door or hauling tools down a walk street or canal path. We also provide Ladera Heights Schlage service with the same approach. A rekey on a standard B60 deadbolt typically costs less than a full Encode install with programming, and we’ll give you a line-item price before any work starts.
Here’s what we typically see:
- Schlage deadbolt rekey: $25-$45 per cylinder, standard door access.
- Schlage B60/BE-series deadbolt installation: $120-$220 including hardware and prep, door fit permitting.
- Schlage Encode or Sense smart lock installation: $180-$320 including programming and pairing setup.
- Walk-street or canal-front access: add $30-$60 depending on distance from truck to door, quoted upfront.
- Tailpiece, spring, or strike plate repair: $40-$90 labor plus OEM part if needed.
We quote the full price on the phone before anyone is dispatched, and that’s the price on the invoice. There’s no call-out surcharge added on arrival. Call (877) 265-3856 for an exact quote, estimates are free.
Serving Venice, CA — Our Local Coverage Area
We’re based in the Venice area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Schlage Locksmith in Venice
Yes, in most cases. If the cylinder isn’t pitted from decades of salt air and the tailpiece hasn’t worn to the point of failure, we re-pin the lock to a new key for a fraction of the replacement cost. If the cylinder is corroded or the internals are shot, we’ll tell you before quoting a repair that won’t hold. Call (877) 265-3856 and we’ll walk you through what you’re actually looking at.
Yes. We install and program Schlage Encode, Sense, Connect, and Camelot keypad deadbolts on short-term rentals throughout Venice, including canal-front and walk-street properties where access is on foot. Turnover-day lockouts are a big part of our week. We stock keypad models locally for same-day installs, and we’ll re-program an existing unit before we sell you a new one. Call (877) 265-3856 for availability.
Salt air and marine humidity from the Pacific pit and seize the brass and steel parts inside Schlage cylinders and strike plates. What starts as a stiff key turn becomes a frozen lock over time. We disassemble, clean, and re-lubricate where the cylinder is salvageable, and we recommend replacement when corrosion has gone too deep. That’s the most common Schlage failure mode in Venice by a wide margin.
Yes, and it’s one of the more common jobs we do in Venice on 1910s and 1920s housing stock. The key is getting the strike alignment and hinge sag corrected so the new bolt throws clean and doesn’t bind. We’ll assess the door, tell you whether a standard retrofit works or whether you need a wrap plate and additional prep, and quote the full job before we cut anything. Call (877) 265-3856 for a free estimate.
No. Tumbler Lock & Key is an independent locksmith shop. We are not authorized, sponsored, or endorsed by Schlage, and we say so plainly because plenty of shops blur that line. What we offer instead is daily, hands-on familiarity with the product line, genuine OEM parts where they’re still available, and yes, straight answers about what’s worth fixing and what’s not.
Service Areas Near Venice
Alongside Venice, we handle Schlage work in nearby communities including Santa Monica, Marina del Rey, Culver City, Playa Vista, and Mar Vista. We also regularly serve Schlage service in Bell for inland calls and Schlage service in Culver City for customers just east of the 405.
Book Your Schlage Service in Venice Today
If your Schlage lock is stiff, spinning, or won’t pair, call us at (877) 265-3856. We’ll talk through what’s happening, quote the full price on the phone, and get it handled. Same-day service is available for most Venice lockouts and urgent rekeys.
Written by Noel Cardenas, Owner & Locksmith, Tumbler Lock & Key, serving Venice since day one. The right lock, fitted right, is the whole job.